If you installed Coreware onto your local Windows computer at your store, this article applies to you.

The first step is to setup your firewall to allow connections from other machines.

1. Open the control Panel

2. Select "System And Security"

3. Click Firewall

4. On the left side panel click "Advanced Settings"

5. On the left panel choose Inbound Rules

6. On the right panel click New Rule

7. Select Port on the next screen

8. Make sure TCP is selected and specify port 80 (Unless you picked a different port during install) and click Next

9. Choose "Allow this connection"

10. If you want it to work over the Internet make sure the 3 boxes Domain, Private and Public are checked and then click Next

11. Name the rule Coreware

12. Click Finish

The next step is to obtain computer host name and/or IP address

It is recommend to use the host name on your local network to access the point of sale system in case your router assigns a new ip address. To obtain your host name, follow these steps:

1. Open System by clicking the Start button Picture of the Start button, right-clicking Computer, and then clicking Properties.

2. Under Computer name, domain, and workgroup settings, you can find your computer name, and its full computer name if your computer is on a domain. You will want to write down the computer name

To obtain your IP address follow these steps:

1. Open Network Connections by clicking the Start button Picture of the Start button, and then clicking Control Panel. In the search box, type adapter, and then, under Network and Sharing Center, click View network connections.
2. Select an active network connection, and then, in the toolbar, click View status of this connection.
   Click Details.
3. Your computer's IP address appears in the Value column, next to IPv4 Address.

After you have obtained your IP address and/or computer name go to another computer on your network and type in http://COMPUTER_NAME or http://IP_ADDRESS

You should now be able to login to Coreware.

NOTE:

If you want to access Coreware over the Internet you will need to setup port forwarding to port 80 on your router and find your public ip address by going to http://www.whatismyip.com. This is a more advanced feature and is different for each router.

1. Choose System Preferences from the Apple menu.

2. Click Security or Security & Privacy.

3. Click the Firewall tab.

4. Unlock the pane by clicking the lock in the lower-left corner and enter the administrator username and password.

5. Click "Turn Off Firewall"